You’ll hardly find a smartphone user who is delighted with the volume intensity and battery life of the device he/she owns. The race among different makers to come up with the “slimmest ever” phone, does not allow them to employ bigger speakers and batteries to make sure louder volume and better battery performance.
Because we are aware that issues like these are some of the commonest grievances among the users, we do not miss to share any mod or workaround to fix them whenever we come to know of it. In the past, we have covered various volume hack mods for different Android devices. In the present article, we’ll see another interesting volume fix mod for the newly released Google flagship, the Nexus 5. one of the reasons why this mod is so interesting is that it’s completely different from any volume fix method we have ever seen for Android devices. You need not root, a custom-made recovery, a root browser or a mod file to do the mod presented below.
Nexus 5 is undoubtedly one of the best smartphones today and it has received pretty positive reviews from critics too. It has a mighty Qualcomm Snapdragon 800 processor, 2GB RAM, a good 4.5″ display and various great specs. However, the only severe issue that lots of users of the phone are reporting is the low volume output of the speakers.
Adam Outler, the well-known developer from XDA, was having low speaker volume on his brand new Nexus 5 and when he contacted some other owners of this phone in his acquaintance, they reported that they did not notice any such problem on theirs. This made Adam think that the volume problem had something to with the hardware of the certain unit of the device he has with him. To fix this issue, he took a bold step that only a man of his mindset would do.
Adam pulled out the back cover and battery of his device and discovered something abnormal. On the closer look, he found that glue used to stick the components of the hardware had made its way into unexpected areas, blocking the volume passage ports. He made a decision to do a hardware mod, gathered the required tools and was able to unblock the ports. After doing this mod, he observed a significant difference in the loudness of the speaker volume of his Nexus 5. If you are facing with the low volume issues on your Nexus 5 too and are daring enough to fix it yourself, we have tried to describe how Adam did all the stuff.
Warning!
The method pointed out below involves doing modification in your phone’s hardware and if not done very carefully might cause severe issues. proceed with caution.
Required Tools:
A #0 screwdriver
An all pin, needle or any similar tool that is easy to hold.
A lighter
A guitar pick
A case opener tool or something similar to that
How to Do the Mod:
Having gathered together the needed tools, it’s now time for some real action.
Remove the back panel of your Nexus 5 using a case opener or any other thing that can do the job.
Now heat up the needle with a lighter and when it is heated up enough to penetrate plastic, put the needle point to the spot shown in the picture below and press it lightly.
Let the needle penetrate until you feel some resistance.
Now step the needle slightly in a rounded way to widen the hole and smoothen it too.
Then use the #0 (zero number) screwdriver and open the four screws.
Then repeat the steps 2-4 on other locations of the assembly as shown in the picture below.
When you are made with making holes in any way pointed ports, reassemble things back.
Done!
Now boot the device and play some audio file. You must feel that the volume is pretty louder than it was before doing the mod. For a lot more info about this hardware volume mod for the Nexus 5, head over to the original thread at XDA and do not forget to hit the thanks button for Adam. Cheers!
Read Next: 8 best Battery-Saving ideas for Android You need to Try